Craftsman 247.88557 Snow Blower Manual

The Craftsman 247.88557 is a powerful snow blower designed to efficiently clear snow from driveways and sidewalks. It features a 24-inch clearing width, a 208cc engine, and a 2-stage snow removal system that allows for effective snow management in various conditions. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Maintenance 5. Troubleshooting 6. Specifications 7. Warranty Information

Features at a Glance

Key components: 24-inch clearing width, 208cc engine, 2-stage snow removal system, adjustable chute, and electric start.

Feature	Description
Clearing Width	24 inches for efficient snow removal
Engine	208cc engine for powerful performance
2-Stage System	Effective snow throwing and clearing
Adjustable Chute	Control snow direction easily
Electric Start	Convenient starting with the push of a button

Safety Information

Always read the safety instructions before operating the snow blower. Wear appropriate clothing and safety gear, and ensure the area is clear of obstacles.

Keep hands and feet away from moving parts.
Do not operate in enclosed spaces.
Check for fuel leaks before starting.
Always use the snow blower in daylight or good artificial light.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To operate the snow blower, follow these steps:

Fill the fuel tank with fresh gasoline.
Check the oil level and add oil if necessary.
Set the throttle to the appropriate position.
Start the engine using the electric start or recoil starter.
Adjust the chute direction and height as needed.
Begin snow removal by pushing the snow blower forward.

CAUTION! Do not overload the snow blower; clear snow in manageable sections.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Check and change the oil regularly.
Inspect the spark plug and replace if necessary.
Clean the air filter to ensure proper airflow.
Sharpen or replace the auger blades as needed.
Store the snow blower in a dry place during off-season.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel issue	Check fuel level and quality; ensure choke is set correctly.
Snow blower not throwing snow	Clogged chute	Clear any obstructions in the chute.
Uneven snow clearing	Worn blades	Inspect and replace auger blades if necessary.
Excessive vibration	Loose parts	Tighten all screws and bolts; inspect for damage.

Reset: Refer to the manual for reset procedures if available.

Specifications

Model: Craftsman 247.88557
Engine: 208cc
Clearing Width: 24 inches
Weight: Approximately 150 lbs
Fuel Type: Unleaded gasoline
Start Type: Electric start

Warranty Information

This snow blower comes with a 2-year limited warranty. For warranty claims, please contact your local Craftsman service center or visit the Craftsman website for more information.