Craftsman 247.888700 Snow Blower Manual

The Craftsman 247.888700 is a powerful snow blower designed to tackle heavy snowfalls with ease. Featuring a 24-inch clearing width and a 208cc engine, this snow blower is equipped to handle various snow conditions. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Maintenance 5. Troubleshooting

Features at a Glance

Key components: 24-inch clearing width, 208cc engine, electric start, adjustable chute, and ergonomic handles.

Feature	Description
Clearing Width	24 inches for efficient snow removal
Engine	208cc engine for powerful performance
Electric Start	Easy starting with the push of a button
Adjustable Chute	Control the direction of snow discharge
Ergonomic Handles	Comfortable grip for extended use

Safety Information

Read the manual thoroughly before operating the snow blower. Always wear appropriate safety gear, including gloves and eye protection.

Keep hands and feet away from moving parts.
Do not operate in enclosed spaces.
Ensure proper fuel handling and storage.
Shut off the engine before performing maintenance.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To operate the snow blower, follow these steps:

Check fuel and oil levels before starting.
Use the electric start button to power on the engine.
Adjust the chute direction using the control lever.
Engage the auger and drive controls to begin snow removal.

CAUTION! Always be aware of your surroundings while operating.

Maintenance

Regular maintenance is essential for optimal performance:

Check oil level: Change oil after every 25 hours of use.
Inspect spark plug: Replace if worn or damaged.
Clean air filter: Ensure proper airflow for the engine.
Store properly: Drain fuel if storing for an extended period.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel issue	Check fuel level and quality; ensure choke is set correctly.
Auger not turning	Drive belt issue	Inspect and replace drive belt if necessary.
Snow not being thrown	Clogged chute	Clear any obstructions from the chute.
Excessive vibration	Loose parts	Tighten all screws and bolts; inspect for damage.

Reset: Follow the manual for resetting the system if applicable.

Service: For further assistance, contact Craftsman customer service.